Overview
About
10G Base-T to 10G Base-R Media Converter supports two types media for network connection such as
10GBase-T and 10GBase-FX. The bridge media converter is designed with a 10Gbase Ethernet PHY chip that
connects two types segments operation smoothly. This converter can be used as standalone unit or as slide-in
module to the 19”converter rack Chassis for use at a central wiring closet.
【 Specification 】
Feature
1.Support Jumbo Frame
2.Transparent Transport and very low delay
3.Support ITUT prescribed DWDM/CWDM wavelength
4.Support DMI function for SFP+ fiber module
5.Support Loopback test function
6.Economic In-band Management function
7.Powerful Network Management function(Web,SNMP,Console)
8.Support hot plugging
9.Support 2U Rack (16 channel) and standalone use
10.Full State Led display
11.Easy installation
12.UTP cable length detection(only RJ45 interface)
| Performance Data | Technical Indexes |
| Transmission Speed | 10Gb/s |
| Protocols | IEEE802.3an(10Gbase-T),IEEE802.3ae(10Gbase-SR/LR/ER/ZR) |
| Access Type | 10G LAN |
| Interface Type | Type: RJ45 To/From SFP+ |
| Transmission Distance | XFP/SFP+ module: Up to 80Km |
| 10Gbase-T: 100meters Cat .6a cable |
| Maximum Packet | 14,880,950/S |
| Forwarding Rate |
| Network management | • Card type information |
| information: | • XFP/SFP+ fiber module detection |
| • XFP/SFP+ fiber module DMI function(Temperature, Voltage, Optical power) |
| • Link status detector |
| • Enable/Disabled Loopback test function |
| • UTP cable length detection ( only RJ45 interface ) |
| • Remote card's status monitor ( only in pairs ) |
| power requirement | Rack-mountable : AC 85 ~ 220V OR DC -48V |
| Standalone: AC 220V OR DC -48V |
| Power consumption: ≤9W |
| Work Environment | Operating Temp: 0~ 50 °C |
| Storage Temp: -10~ 70 °C |
| Humidity: 5%~90% ( non-condensing ) |
| Dimension | Card: 11.5mm (W) × 78mm ( D) |
| Standalone: 156mm ( W ) × 128mm ( D ) × 32mm ( H) |
| Warranty | 1 Years |



