Overview
About
10G Base-T to 10G Base-R Media Converter supports two types media for network connection such as
10GBase-T and 10GBase-FX. The bridge media converter is designed with a 10Gbase Ethernet PHY chip that
connects two types segments operation smoothly. This converter can be used as standalone unit or as slide-in
module to the 19”converter rack Chassis for use at a central wiring closet.
【 Specification 】
Feature
1.Support Jumbo Frame
2.Transparent Transport and very low delay
3.Support ITUT prescribed DWDM/CWDM wavelength
4.Support DMI function for SFP+ fiber module
5.Support Loopback test function
6.Economic In-band Management function
7.Powerful Network Management function(Web,SNMP,Console)
8.Support hot plugging
9.Support 2U Rack (16 channel) and standalone use
10.Full State Led display
11.Easy installation
12.UTP cable length detection(only RJ45 interface)
Performance Data | Technical Indexes |
Transmission Speed | 10Gb/s |
Protocols | IEEE802.3an(10Gbase-T),IEEE802.3ae(10Gbase-SR/LR/ER/ZR) |
Access Type | 10G LAN |
Interface Type | Type: RJ45 To/From SFP+ |
Transmission Distance | XFP/SFP+ module: Up to 80Km |
10Gbase-T: 100meters Cat .6a cable |
Maximum Packet | 14,880,950/S |
Forwarding Rate |
Network management | • Card type information |
information: | • XFP/SFP+ fiber module detection |
| • XFP/SFP+ fiber module DMI function(Temperature, Voltage, Optical power) |
| • Link status detector |
| • Enable/Disabled Loopback test function |
| • UTP cable length detection ( only RJ45 interface ) |
| • Remote card's status monitor ( only in pairs ) |
power requirement | Rack-mountable : AC 85 ~ 220V OR DC -48V |
Standalone: AC 220V OR DC -48V |
Power consumption: ≤9W |
Work Environment | Operating Temp: 0~ 50 °C |
Storage Temp: -10~ 70 °C |
Humidity: 5%~90% ( non-condensing ) |
Dimension | Card: 11.5mm (W) × 78mm ( D) |
Standalone: 156mm ( W ) × 128mm ( D ) × 32mm ( H) |
Warranty | 1 Years |



