Overview
About Fiber Media Converter
10/100M Singlemode Single Fiber Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100M UTP interface (TX) and 100M Fiber interface (FX). The traditional 10/100M Fast Ethernet can be extended to the distance of 160km through Single Optical Fiber link. The performance and quality of the products are excellent because of adopting latest IC from Taiwan. It must be used in couples, because the transmitted optical differs from the receive optical in wavelength.
【 Specification 】
Features
1. Support the switch between 100Base-TX and 100Base-FX 2.
2*155Mbps full-duplex fiber port and 4*100M Ethernet port
3. Each port has the complete LED Indicator light for installation, commissioning and maintenance
4. Support 9K Jumbo Packet
5. Support direct forwarding mode, less time delay
6. Less power consumption, only 1.5W in full load condition
7. Support isolation protection function, good data security
8. Small size, suitable for installation in various places
9. Adopt low power consumption chips to ensure longtime and stable operation
Product | 10/100M Meida Converter SMF 2Fiber+4Rj45 |
Standards | IEEE 802.3 10Base-T |
IEEE 802.3u 100Base-TX |
Ethernet Port | Connector: RJ45 |
Data Rate: 10/100M |
Distance: 100m |
UTP Type: UTP-5E or higher level |
Fiber Port | Connector: SC/FC/ST/SFP slot |
Data Rate: 10/100Mbps |
Distance: 550m~120km |
Port | 4 RJ45 port, 2 fiber port (SC/LC/ST/FC Optional) |
Forward / Filter Rate | 10M: 14,880/14,880pps |
100M: 148,800/148,800pps |
Power Supply | External : 5V DC 1A |
Built-in: 100 V to 240 V AC 50Hz to 60Hz Power Consumption : ≤5W |
Operating Temperature | 0 °C to +70 °C |
Storage Temperature | -20 °C to +80 °C |
Relative Humidity | 5% to 90% (non-condensing) |
Dimensions | 95mm * 70 mm * 26mm |
Net Weight | 0.3 kg/pcs |
Warranty | 2 Years |



