24 Cores MTP(Female) To 12 LC Duplex Standard Harness Cables

Content Introduction: This breakout cable assembly features a female MTP connector on one end transitioning to twelve LC duplex connectors, facilitating high-density interconnections between MTP backbone systems and LC-terminated equipment. Designed for data center and telecommunications environments, it streamlines fiber distribution with OS2 single-mode fiber ensuring reliable long-distance transmission.

Product Features:  

Female MTP interface without guide pins.  

Twelve duplex LC connectors for device termination.  

OS2 9/125μm single-mode fiber construction.  

Low insertion loss ≤0.5dB at MTP, ≤0.3dB at LC.  

High return loss ≥50dB performance.  

OFNP-rated plenum jacket for fire safety.  

Precise polarity Type A or B options.  

Pre-terminated plug-and-play readiness.  

Compact 3.0mm overall cable diameter.  

Operating temperature -40°C to +80°C.  

Compliant with TIA/EIA and IEC standards.  

Ideal for 10G/40G/100G networks.  

Optimized bend radius design.  

Ruggedized strain relief boot protection.  

LSZH material compliance.

Standard harness Cables assemblies.MTP- LC/SC/FC/ST Standard

harness Cables are terminated with MTP and LC/SC/FC/ST connector on both ends. The 24pcs(12pcs for LC uniboot;24 LC Simplex)

fanout cables are optimized for 40G QSFP+ PLR4 to 10G SFP+ LR optics direct connection and high-density data center applications.

have same length . It's specifically designed for high-density fiber patching in data centers which need space saving and reduce

cable management troubles.

24F MTP- LC/SC/FC/ST Standard harness Cables designed for 100GBASE-SR10 CXP/CFP Interconnect Solution,100GBASE-LR4 and

high-density data center. It is optimized for 10/40/100G high-density data center applications. This 24 Fiber harness cable is

used for connecting (12) SFP+ into a MTP adapter panel and MTP trunk.

All of OMC’s MTP Connectors are from USCONEC. MTP Patch cable/trunk cable is a kind of high density cable assemblies which is

generally use in three areas.

1, The Data Center application with high dense degree environment

2, The optical fiber to the building

3, The internal connector application in fiber equipment.